Before directly to the electrical equipment bayBefore directly to the electrical equipment bay

Before the turn of the 20th century and
in the early 20th century, airplanes didn’t need electricity as
there were no electrical components in the plans. That has since changed and
airplanes nowadays require electricity for a number of functions. This calls
for an intricate system to generate and distribute power in the plane mostly in
Alternating Current like in the Boeing 787 Dreamliner. The AC power is mainly a
three-phase way generator at ii5VAC with a 400Hz. The 400Hz has been a standard
for years as the power can be generated with lighter and smaller generators
than 50/60Hz systems. Although using higher frequencies is not ideal for
transmitting power over long distances, it is ideal for airspace application
because of the lighter system. The power distribution systems used in the 787
aircraft creates a complexity to impact the power generation system design to
enable it route power around the localized faults to maintain the airworthiness
of the aircraft (Dornheim, 2005). The 787 aircraft run power from the generator
directly to the electrical equipment bay from where it is distributed to
various locations within the aircraft. The Boeing 787 Dreamliner is known to
use less pneumatic and more electricity to power the systems like the wing-ice
protection, hydraulic systems, and to start the engine. Systems electrification
is a major focus of aircraft architectures. Its electrification is important as
it enables the design, maintenance, and manufacturing optimizations. Correct electrification
is beneficial because:

It improves the
overall system performance

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!

order now

It is more
reconfigurable and flexible

Has a
streamlined manufacturing and assembly

Has simplified
maintenance operations

The AC power
frequency depends on the engine speed hence variable. The Boeing 787 Dreamliner
has four generators, two on the auxiliary power unit and the other two on each

The system that
feeds the systems run from these generators to the electrical equipment

There are 17
electrical sub-stations provide power to localized bays.

The six
generator in the 787 is to hell the aircraft generate more electricity as it
uses more than the other Boeing aircraft.

On the ground,
the Boeing 787 Dreamliner can start without power generation.

The APU generators
start to power the engine generators using the APU battery and then these
generators start the engines.

The primary
source of electrical power when the aircraft is on flight mode are the four
engine generators while the APU generators are the secondary sources. The power
generated by these generators are used as the four alternating current buses.

In the AC, the
power is either distributed to be used as 235 VAC or converted to what the
system needs.

The other power
sources for the AC system in the Boeing 787 include the main battery. The main
battery is used to generate power for ground operations, such as braking the

The generated ground
power produced by the APU battery is capable of connecting via the three power vessels.

The APU and
main battery, and ram-air turbine serve as the power backups in the flight in
case the aircraft experiences a power failure.

The state-of-the-art technology has developed an
alternating current generator starter. The main functions of the AC Starter-Generator
include to electrically generate power to start the engine as well generate
main electrical power for the aircraft network which is a system that can be
used to generate AC power in the 787 aircraft.

Summing up, the Boeing 787 Dreamliner has four main
GCUs that are associated with the engine mounted to the six generators (Norris
and Wagner, 2009). If all of the GCUs are powered up at the same time, after
about two hundred and forty-seven days of continuo power, all the four GCUs
will fail at the same time; thus the AC power will not be generated anymore
regardless of the flight phase.